Frequently Asked Questions

1. What are the typical turn around times for a bare PCB prototype panel to be made?

Answer: We can offer a turnaround time in as little as 5-7 days on a 2-layer PCB. These times are based on there being no engineering queries needing to be resolved during manufacturer.

2. What are the capabilities for bare PCB manufacture?

Answer: Typically we can offer the following. If you have a special requirement please let us know so we can do our best to accommodate your requirements

* Single layer up to 12 layers is available

* Flexible PCB's

* Flash / Hard Gold Plating (120u)

* Hot Air Solder Levelling

* Peel-able Mask / Carbon Ink Printing

* Immersion Tin / Gold (Flash/Thick)

* Selective Plating / Entek Coating

* CNC V-Cut / Gold Finger Process

* Blind/Buried Via Hole for Multilayer Boards

* RoHS or Hologen Free PCBs

* Flexible or Flexible / Rigid single & multilayer PCBs

* Aluminium Based Single & Double Side PCBs

 

3. What types of testing are done to the PCB to ensure that they have been manufactured properly?

Answer: Full electronic tests are performed on the boards to ensure that all the tracks are connecting. The plating thickness is also measured to ensure that it is up to standard. A full report will be issued to verify this if required.

To contact us:

 

Phone: (07) 5564 6012 / Int Ph: +61 7 5564 6012

Fax: (07) 5564 5612/ Int Fax: +61 7 5564 5612

E-mail: sales@completepcbsolutions.com